´╗┐TITAN coatings cleaning guide

 

Step 1- Blow or vacuum off the floor to remove any large debris.

 

Step 2- Rinse off the floor with a hose or pressure washer.

 

Step 3- Apply a PH Neutral cleaning solution to the floor. (Simple green or Dawn dish soap.) Diluted with water for general Cleaning.

 

Step 4- Use a mop to clean the floor.  We recommend a Rayon mop versus a cotton mop. (cotton fibers can catch on the flake and leave fuzz balls)

 

Step 5- For heavy soiled areas scrub with a soft nylon bristled brush (do not use a hard bristle brush as this could scratch your floor)

 

Step 6- Rinse off the floor with a hose or pressure washer.

 

Step 7- Use a foam squeegee (available at Wal-Mart) to remove excess water from the floor. Do not use a hard rubber squeegee

 

Use caution while cleaning, floor may be slippery when wet!

 

Clean your floor as often as practical to reduce wear and abrasion. 

 

Enjoy your floor for years to come and thank you for chosing Titan Coatings!

          Salt Lake City, UT /  titancoatingsutah@gmail.com / (801) 637-0300